MSGCTL

Section: Linux Programmer's Manual (2)
Updated: 2020-11-01
Index JM Home Page
 

名前

msgctl - System V メッセージ制御操作  

書式

#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/msg.h>

int msgctl(int msqid, int cmd, struct msqid_ds *buf);
 

説明

msgctl() はメッセージキュー識別子 msqid で指定された System V メッセージキュー (message queue) に対して cmd で指定された制御操作を行なう。

msqid_ds データ構造体は <sys/msg.h> で以下のように定義されている:

struct msqid_ds {
    struct ipc_perm msg_perm;   /* Ownership and permissions */
    time_t          msg_stime;  /* Time of last msgsnd(2) */
    time_t          msg_rtime;  /* Time of last msgrcv(2) */
    time_t          msg_ctime;  /* Time of creation or last
                                   modification by msgctl() */
    unsigned long   msg_cbytes; /* # of bytes in queue */
    msgqnum_t       msg_qnum;   /* # number of messages in queue */
    msglen_t        msg_qbytes; /* Maximum # of bytes in queue */
    pid_t           msg_lspid;  /* PID of last msgsnd(2) */
    pid_t           msg_lrpid;  /* PID of last msgrcv(2) */ };

msgid_ds 構造体のフィールドは以下の通りである:

msg_perm
This is an ipc_perm structure (see below) that specifies the access permissions on the message queue.
msg_stime
最後の msgsnd(2) システムコールの時刻。
msg_rtime
最後の msgrcv(2) システムコールの時刻。
msg_ctime
Time of creation of queue or time of last msgctl() IPC_SET operation.
msg_cbytes
Number of bytes in all messages currently on the message queue. This is a nonstandard Linux extension that is not specified in POSIX.
msg_qnum
Number of messages currently on the message queue.
msg_qbytes
Maximum number of bytes of message text allowed on the message queue.
msg_lspid
最後の msgsnd(2) システムコールを実行したプロセスの ID。
msg_lrpid
最後の msgrcv(2) システムコールを実行したプロセスの ID。

ipc_perm 構造体は以下のように定義されている (強調されたフィールドは IPC_SET を使って設定可能である):

struct ipc_perm {
    key_t          __key;       /* msgget(2) に与えるキー */
    uid_t          uid;         /* 所有者の実効 UID */
    gid_t          gid;         /* 所有者の実効 GID */
    uid_t          cuid;        /* 作成者の実効 UID */
    gid_t          cgid;        /* 作成者の実効 GID */
    unsigned short mode;        /* 許可 */
    unsigned short __seq;       /* シーケンス番号 */ };

The least significant 9 bits of the mode field of the ipc_perm structure define the access permissions for the message queue. The permission bits are as follows:

0400 ユーザーによる読み出し
0200 ユーザーによる書き込み
0040 グループによる読み出し
0020 グループによる書き込み
0004 他人 (others) による読み出し
0002 他人 (others) による書き込み

ビット 0100, 0010, 0001 (実行ビット) をシステムは使用しない。

cmd として有効な値は:

IPC_STAT
msqid に関連づけられたメッセージキューデータ構造体から、ポインター buf が指し示す msqid_ds 構造体に情報をコピーする。 呼び出し側はメッセージキューに対する読み込み許可を持っていなければならない。
IPC_SET
Write the values of some members of the msqid_ds structure pointed to by buf to the kernel data structure associated with this message queue, updating also its msg_ctime member.
The following members of the structure are updated: msg_qbytes, msg_perm.uid, msg_perm.gid, and (the least significant 9 bits of) msg_perm.mode.
The effective UID of the calling process must match the owner (msg_perm.uid) or creator (msg_perm.cuid) of the message queue, or the caller must be privileged. Appropriate privilege (Linux: the CAP_SYS_RESOURCE capability) is required to raise the msg_qbytes value beyond the system parameter MSGMNB.
IPC_RMID
メッセージキューをただちに削除する。 同時にその構造体の読み書きの待ち状態にあったプロセスに通知する (エラーが返り、 errnoEIDRM に設定される)。 呼び出したプロセスが適切な特権を持っているか、 呼び出したプロセスの実効ユーザー ID がメッセージキューの作成者か 所有者の実効ユーザー ID でなければならない。この場合、 msgctl() の第 3 引数は無視される。
IPC_INFO (Linux 固有)
システム全体でのメッセージキューの制限とパラメーターに関する情報を、 buf が指す構造体に入れて返す。 この構造体は msginfo 型である (そのためキャストが必要である)。 msginfo_GNU_SOURCE 機能検査マクロが定義された場合に <sys/msg.h> で以下のように定義される:
struct msginfo {
    int msgpool; /* メッセージデータの保持に使用される
                    バッファープールの大きさ (1024 バイト単位);
                    カーネル内では未使用 */
    int msgmap;  /* メッセージマップの最大エントリー数;
                    カーネル内では未使用 */
    int msgmax;  /* 一つのメッセージに書き込み可能な
                    最大バイト数 */
    int msgmnb;  /* 一つのキューに書き込み可能な最大バイト数;
                    (msgget(2) での) キュー作成中の msg_qbytes
                    の初期化に使用される */
    int msgmni;  /* メッセージキューの数の最大値 */
    int msgssz;  /* メッセージセグメントのサイズ;
                    カーネル内では未使用 */
    int msgtql;  /* システム上の全キューの最大メッセージ数;
                    カーネル内では未使用 */
    unsigned short msgseg;
                 /* 最大セグメント数; カーネル内では未使用 */ };
設定 msgmni , msgmax , msgmnb/proc にある同じ名前のファイル経由で変更可能である。 詳しくは proc(5) を参照。
MSG_INFO (Linux 固有)
IPC_INFO のときと同じ情報を格納した msginfo 構造体を返す。 但し、以下のフィールドにはメッセージキューが 消費しているシステム資源に関する情報が格納される点が異なる。 msgpool フィールドは現在システム上に存在するメッセージキューの数を返す。 msgmap フィールドはシステム上の全てのキューに入っているメッセージ総数を返す。 msgtql フィールドはシステム上の全てのキューに入っている全メッセージの 総バイト数を返す。
MSG_STAT (Linux 固有)
IPC_STAT と同じく msqid_ds 構造体を返す。 但し、 msqid 引数は、キュー識別子ではなく、システム上の全てのメッセージキュー に関する情報を管理するカーネルの内部配列へのインデックスである。
MSG_STAT_ANY (Linux 固有, Linux 4.17 以降)
Return a msqid_ds structure as for MSG_STAT. However, msg_perm.mode is not checked for read access for msqid meaning that any user can employ this operation (just as any user may read /proc/sysvipc/msg to obtain the same information).
 

返り値

On success, IPC_STAT, IPC_SET, and IPC_RMID return 0. A successful IPC_INFO or MSG_INFO operation returns the index of the highest used entry in the kernel's internal array recording information about all message queues. (This information can be used with repeated MSG_STAT or MSG_STAT_ANY operations to obtain information about all queues on the system.) A successful MSG_STAT or MSG_STAT_ANY operation returns the identifier of the queue whose index was given in msqid.

エラーの場合は -1 を返し、 errno を適切に設定する。  

エラー

失敗した場合、 errno は以下の値の中のどれか一つに設定される:
EACCES
The argument cmd is equal to IPC_STAT or MSG_STAT, but the calling process does not have read permission on the message queue msqid, and does not have the CAP_IPC_OWNER capability in the user namespace that governs its IPC namespace.
EFAULT
引数 cmdIPC_SETIPC_STAT で、ポインター buf で指されているアドレスがアクセス可能でない。
EIDRM
メッセージキューが削除された。
EINVAL
cmd または msqid に不正な値が設定された。 もしくは、 MSG_STAT 操作の場合に、 msqid で指定されたインデックス値が現在未使用の配列のスロットを参照いていた。
EPERM
引数 cmdIPC_SETIPC_RMID であるが、呼び出したプロセスの実効ユーザー ID がメッセージキューの (msg_perm.cuid として見つかる) 作成者 と (msg_perm.uid として見つかる) 所有者のいずれでもなく、 かつ呼び出し者に特権がない (Linux では CAP_SYS_ADMIN ケーパビリティがない)。
EPERM
IPC_SETmsg_qbytes をシステムパラメーター MSGMNB より大きな値に設定しようとしたが、呼び出し元が特権を持っていなかった (Linux では、 CAP_SYS_RESOURCE ケーパビリティを持っていなかった)。
 

準拠

POSIX.1-2001, POSIX.1-2008, SVr4.  

注意

Linux や POSIX の全てのバージョンでは、 <sys/types.h><sys/ipc.h> のインクルードは必要ない。しかしながら、いくつかの古い実装ではこれらのヘッダーファイルのインクルードが必要であり、 SVID でもこれらのインクルードをするように記載されている。このような古いシステムへの移植性を意図したアプリケーションではこれらのファイルをインクルードする必要があるかもしれない。

IPC_INFO, MSG_STAT, MSG_INFO 操作は、 ipcs(1) プログラムで割り当て済の資源に関する情報を提供するために 使用されている。将来、これらの操作は変更されたり、 /proc ファイルシステムのインターフェースに移動されるかもしれない。

struct msqid_ds 内の多くのフィールドは、 Linux 2.2 では short だったが、Linux 2.4 では long になった。 この利点を生かすには、glibc-2.1.91 以降の環境下で 再コンパイルすれば十分である。 (カーネルは新しい形式の呼び出しと古い形式の呼び出しを cmd 内の IPC_64 フラグで区別する。)  

関連項目

msgget(2), msgrcv(2), msgsnd(2), capabilities(7), mq_overview(7), sysvipc(7)  

この文書について

この man ページは Linux man-pages プロジェクトのリリース 5.10 の一部である。プロジェクトの説明とバグ報告に関する情報は https://www.kernel.org/doc/man-pages/ に書かれている。

関連キーワード

msqid, perm, STAT, queue, メッセージキュー, int, cmd, メッセージ, 設定, 実効

Linux マニュアル 一覧

[man1] [man2] [man3] [man4] [man5] [man6] [man7] [man8]
[a] [b] [c] [d] [e] [f] [g] [h] [i] [j] [k] [l] [m] [n] [o] [p] [q] [r] [s] [t] [u] [v] [w] [x] [y] [z]

 

Index

名前
書式
説明
返り値
エラー
準拠
注意
関連項目
この文書について

This document was created by man2html, using the manual pages.
Time: 12:08:50 GMT, June 11, 2022